Gt 8m Timing Pulley with Surface Chrome-Free Dacromet

Gt 8m Timing Pulley with Surface Chrome-Free Dacromet

Ubet CZPT offers a wide range of high good quality Timing Belt Pulleys and Toothed Bars/ Timing Bars. CZPT and non-standard pulleys according to drawings are CZPT.

 

Varieties of material:
  1. AlCuMgPb 6061 6082 Aluminum Timing Pulley
  two. C45E 1045 S45C Carbon Steel Timing Pulley
  three. GG25 HT250 Cast Iron Timing Pulley
  four. SUS303 SUS304 AISI431 Stainless Steel Timing Pulley
  5. Other content on desire, such as cooper, bronze and plastic
 
Kinds of surface area remedy
 1.  Anodized surface -Aluminum Pulleys
 2.  Hard anodized floor — Aluminum Pulleys
 3.  Black Oxidized area — Steel Pulleys
 4. Zinc plated floor — Steel Pulleys
 5. Chromate surface — Steel Pulleys Cast Iron Pulleys
 6. Nickel plated surface area –Steel Pulleys Cast Iron Pulleys
 
Varieties of tooth profile

Enamel Profile Pitch
HTD 3M,5M,8M,14M,20M
AT AT5,AT10,AT20
T T2.5,T5,T10
MXL .08″(two.032MM)
XL 1/5″(five.08MM)
L 3/eight”(nine.525MM)
H 1/2″(twelve.7MM)
XH 7/8″(22.225MM)
XXH one 1/four”(31.75MM)
STS STPD S2M,S3M,S4.5M,S5M,S8M,S14M
RPP RPP5M,RPP8M,RPP14M,RPP20M
PGGT PGGT  2GT, 3GT and 5GT
PCGT GT8M,GT14M

 
Varieties of pitches and sizes

Imperial Inch Timing Belt Pulley,
one.     Pilot Bore MXL571 for 6.35mm timing belt tooth number from 16 to seventy two
2.  Pilot Bore XL037 for 9.53mm timing belt enamel variety from 10 to seventy two
3.  Pilot Bore, Taper Bore L050 for 12.7mm timing belt tooth amount from 10 to 120
4.  Pilot Bore, Taper Bore L075 for 19.05mm timing belt enamel number from ten to one hundred twenty
five.  Pilot Bore, Taper Bore L100 for 25.4mm timing belt tooth amount from ten to one hundred twenty
6.  Pilot Bore, Taper Bore H075 for 19.05mm timing belt enamel number from fourteen to 50
seven.  Pilot Bore, Taper Bore H100 for 25.4mm timing belt tooth number from 14 to 156
8.  Pilot Bore, Taper Bore H150 for 38.1mm timing belt enamel variety from 14 to 156
nine.  Pilot Bore, Taper Bore H200 for 50.8mm timing belt teeth number from 14 to 156
ten.  Pilot Bore, Taper Bore H300 for seventy six.2mm timing belt enamel amount from 14 to 156
11.  Taper Bore XH200 for 50.8mm timing belt tooth quantity from eighteen to a hundred and twenty
twelve.  Taper Bore XH300 for 76.2mm timing belt teeth number from eighteen to one hundred twenty
thirteen.  Taper Bore XH400 for one zero one.6mm timing belt teeth variety from eighteen to one hundred twenty

Metric Timing Belt Pulley T and AT
1.  Pilot Bore T2.five-16 for 6mm timing belt enamel number from twelve to 60 
2.   Pilot Bore T5-21 for 10mm timing belt enamel quantity from 10 to 60 
three.   Pilot Bore T5-27 for 16mm timing belt teeth amount from 10 to 60 
four.   Pilot Bore T5-36 for 25mm timing belt teeth number from 10 to 60 
five.   Pilot Bore T10-31 for 16mm timing belt enamel number from 12 to 60 
six.   Pilot Bore T10-40 for 25mm timing belt teeth number from 12 to 60 
7.   Pilot Bore T10-47 for 32mm timing belt enamel number from eighteen to 60 
8.   Pilot Bore T10-66 for 50mm timing belt enamel number from 18 to 60
nine.  Pilot Bore AT5-21 for 10mm timing belt tooth amount from 12 to 60
10. Pilot Bore AT5-27 for 16mm timing belt tooth number from twelve to sixty
11. Pilot Bore AT5-36 for 25mm timing belt tooth quantity from twelve to 60 
12. Pilot Bore AT10-31 for 16mm timing belt teeth variety from fifteen to 60 
thirteen. Pilot Bore AT10-40 for 25mm timing belt enamel variety from 15 to 60 
fourteen. Pilot Bore AT10-47 for 32mm timing belt teeth variety from eighteen to 60 
15. Pilot Bore AT10-66 for 50mm timing belt enamel amount from eighteen to sixty
  
Metric Timing Belt Pulley HTD3M, 5M, 8M, 14M 
one.  HTD3M-06 3M-09 3M-fifteen tooth amount from ten to 72 
2.  HTD5M-09 5M-15 5M-25 tooth variety from 12 to 72 
three.  HTD8M-20 8M-30 8M-fifty 8M-85 teeth amount from 22 to 192 
4.  HTD14M-forty 14M-55 14M-85 14M-one hundred fifteen 14M-one hundred seventy enamel number from 28-216 
five.  Taper Bore HTD5M-15 8M-20 8M-thirty 8M-fifty 8M-85 14M-forty 14M-55 14M-eighty five
         14M-one hundred fifteen 14M-one hundred seventy

Metric Timing Belt Pulleys for Poly Chain GT2 Belts 
one.      PCGT8M-twelve PCGT8M-21 PCGT8M-36 PCGT8M-62 
two.      PCGT14M-20 PCGT14M-37 PCGT14M-68 PCGT14M-90 PCGT14M-a hundred twenty five

Energy Grip Gates Tooth/ PGGT 2GT, 3GT and 5GT 
1. 2GT-06, 2GT-09 for timing belt width 6mm and 9mm 
two. 3GT-09, 3GT-15 for timing belt width 9mm and 15mm 
3. 5GT-fifteen, 5GT-25 for timing belt width 15mm and 25mm

OMEGA RPP HTD Timing Pulleys 
1.   RPP3M-06 3M-09 3M-fifteen teeth variety from ten to 72 
two.   RPP5M-09 5M-fifteen 5M-twenty five tooth quantity from twelve to 72 
three.   RPP8M-20 8M-thirty 8M-50 8M-eighty five tooth quantity from 22 to 192 
4.   RPP14M-40 14M-fifty five 14M-eighty five 14M-115 14M-a hundred and seventy teeth variety from 28-216 
5.  Taper Bore RPP5M-15 8M-twenty 8M-thirty 8M-fifty 8M-eighty five 14M-forty 14M-fifty five 14M-85
     14M-a hundred and fifteen 14M-one hundred seventy

Gt 8m Timing Pulley with Surface Chrome-Free Dacromet