- FEEDER (Max minimize direct edge feeder)
- New up graded, very same as Max cut guide edge feeder, a lot more exact and optimistic feeding.
- Exceptional jogger at feeder to get ready for the achievable potential in line procedure with pre feeder (optional).
- Pneumatic facet thrust guidebook plates (remaining and correct sides).
- Remaining and right side guides, individually situation adjustable and register facet at option for each box structure.
- Large vacuum blower with silencer and valving system.
- DIECUTTING Area
- Crank and worm equipment, toggle drive technique for the lower platen.
- The cell platen stroke is increased from 71mm to 95mm for managing corrugated board (particularly AB Flute) smoother.
- Stationary large precision upper platen.
- Security door and die chaser safety locking system.
- Large torque pneumatic clutch/split for optimistic clutch on and trustworthy breaking, and particular air inlet system to manage the air quantity for easy equipment begin and quit.
- Air cushion underneath the slicing plate for straightforward reducing plate in and out.
- Equipment primary drive.
- Overloading defense torque limit clutch.
- State-of-the-artwork three cam index gripper chain generate.
- Center line method compatible to Middle Line II, helps make the slicing die and stripping die centered speedily.
- Substantial quality precision alloy gripper bars, each with twelve special hardened grippers to make sure company grab of the sheet at large velocity.
- Sheet arrival and departure verify photograph sensor.
- Left and proper entrance lay locking blocks, separating and synchronizing adjustment CZPT.
- Chain information rail use VL compound to enhance abrasive resistance and seismic resistance.
- Self-diagnostic difficulty exhibit.
- Digital velocity show.
- Automated recycling lubrication system with oil stress gauge and oil strain swap.
- Computerized major gripper drive chain lubrication.
- STRIPPING Area
- Centerline system (compatible to Centerline II).
- 400mm higher stripping body raiser boosts the operation room, much more operator friendly.
- Motorized upper frame suspending hoister.
- Lead edge squander elimination system.
- Centerline system for quick stripping die set up.
- Shipping and delivery
- Escalator supply fork with non-end air cylinder for neat and optimistic supply and conveyor belt shipping table to defend the sheets from scratches.
- Bundle shipping and delivery with pre-established counter requesting only a single sheet interval in non-cease operation at 4500S/H production pace.
- The bundle delivery desk can be prepared for future connection with breaker for in line procedure (to be essential at get).
- Complete stripping with/CZPT guide edge squander stripping convertible by 1 button, no device adjust, a lot more operator friendly and secure procedure.
- CZPT loaded adjustable chain rigidity back again buffering wheel to sustain the chain tension constant and easy gripper bar movement.
| No. | Product | RYPE-1620SA |
| one | Maximum Sheet Measurement | 1620x1200mm |
| 2 | Minimal Sheet Dimensions | 650x450mm |
| 3 | Highest Slicing Dimensions | 1600x1180mm |
| 4 | Interior CZPT Measurement | 1630x1210mm |
| five | Optimum Mechanical Velocity | 5000 cycles/hour |
| six | Maximum Cutting Stress | 400 tons |
| 7 | Stock Range | E, B,C,A and AB flute corrugated board (1~eight.5mm) |
| eight | Least Gripper Margin | six~12mm |
| 9 | Minimal Gripper Waste | 12mm(Length from first knife to paper edge) |
| ten | Reducing Rule Top | 23.8mm |
| 11 | Complete Electricity Essential | 35 KW |
| 12 | Primary Motor Power | 22 KW |
| 13 | CZPTal Energy | 380V, 50HZ, 3-section |
| fourteen | Air Pump Displacement | .7m³/min |
| 15 | Cell Reduce Platen Altering Range | ±1.5mm |
| 16 | Net Weight of Device | 32 tons |
| seventeen | Gross Excess weight of Machine | 39.5 tons |
| 18 | Equipment Proportions (LxWxH) | 9980×5670 x2480 mm (consists of walking board) |
